by bbeach | April 13, 2012 8:03 pm

Kejin Wang

  • Wilson Engineering Professor
  • Civil, Construction and Environmental Engineering

Main Office

412 Town Engr
Ames, IA 50011-3232
Phone: 515-294-2152
Fax: 515-294-8216

Email: kejinw@iastate.edu[1]


  • Ph.D. Civil Engineering, University of California, Berkeley, 1994
  • M.S. Civil Engineering, Chinese Academy of Sciences (Beijing, China), 1985
  • B.S. Civil Engineering, Hefei University of Technology (Hefei, China), 1982

Interest Areas

  • Chemistry and microstructure of concrete (cement hydration and air void structure)
  • Nano-technology and application in concrete (nano-silica, nano-clay and nano-limestone)
  • Workability and rheology of concrete
  • Durability of concrete (freezing-thawing, alkali-silica reaction, and corrosion of reinforcement)
  • Sustainable concrete materials (uses of slag, fly ash, silica fume, recycled aggregate, geopolymer, etc.)
  • Advanced concrete technology (self-consolidating concrete, roller compacting concrete, mass concrete and pervious concretes)
  • Concrete pavement (mix design, quality control, distress analysis, and repair)

Brief Biography

Professional Registration & Membership

  • Professional Engineer (P.E.): Civil Engineering, State of Illinois
  • Associate Editor of ASCE Journal of Materials in Civil Engineering
  • Associate Editor of Journal of Sustainable Cement-based Materials
  • Editorial Board Member of ASTM Journal of Advances in Civil Engineering Materials
  • Editorial Board Member of Journal of ASTM International

Honors & Awards

  • Wilson Professor of Engineering, March 2017
  • Guest Professor, Southeast University and Jinan University, China, 2016
  • Iowa State University Award for Outstanding Achievement in Research, ISU, 2015
  • Fellow of American Concrete Institute (since March 2013)
  • Charles W. Schafer Faculty Award for “Excellence in Teaching, Research and Service in Civil Construction, and Environmental Engineering”, ISU, 2010 (the second time)
  • Outstanding Editorial Board Member, Journal of ASTM International, 2008
  • Honorary Professor, School of Civil Eng., Chongqing  Jiaotong University of Technology, China, 2008
  • Charles W. Schafer Faculty Award for “Excellence in Teaching, Research and Service in Civil Construction, and Environmental Engineering”, ISU, 2006
  • Honorary Professor, School of Civil Engineering, Hefei University of Technology, China, 2006
  • Honorary Professor, School of Civil Engineering, Lanzhou Jiaotong University, China, 2003

Selected Publications

Books Edited/Co-edited

  1. K. Wang, Rheology of Cement Based Materials, Special Issue in the journal of ASTM Advanced Civil Engineering Materials, Dec. 2014; http://www.astm.org/BOOKSTORE/PUBS/ACEM14V3N2.htm
  2. K. Wang, S. P. Shah, and K. Khayat, Guest Editors, Special Issue on Self-Consolidating Concrete, Journal of Cement and Concrete Composite, Vol. 54, Pages 1-126 (2014), http://www.sciencedirect.com/science/journal/09589465/54
  3. K. Wang and G. R. Lomboy, Recent Studies on Constituent Materials of Self-consolidating Concrete, Special Issue, Journal of Sustainable Cement-Based Materials, Vol. 3, Issue 3-4, 2014, http://www.tandfonline.com/doi/abs/10.1080/21650373.2014.975428#.VFo7XMkrFyw
  4. K. Wang, S. P. Shah, and K. Khayat, Editors. Proceedings of the Fifth North American Conference on the Design and Use of Self-Consolidating Concrete, Chicago, May 12-15, 2013
  5. K. Wang, Editor, (2010) Recent Advancement in Concrete Freezing-thawing (F-T) Durability, West Conshohocken, PA: ASTM International.
  6. K. Wang and Anton K. Schindler, Editor. (2007) Concrete Heat Development: Monitoring, Prediction, and Management, ACI SP-241, American Concrete Institute (ACI), Farmington Hills, MI.
  7. K. Wang, Editor. (2004) Proceedings of International Workshop on Sustainable Development and Concrete Technology, Beijing, China, May 20–22, 2004, ISBN 0-9652310-0, ISU, Ames, Iowa.

Journal Papers

  1. G. Lomboy, F. Bektas, K. Wang, “Extended Use of Limestone Fines in Various Concretes”, Journal of Civil Engineering and Architecture, 10 (2016) 995-1005 doi: 10.17265/1934-7359/2016.09.003
  2. Z. Zhang, K. Wang, H. Liu, Z. Deng, “Key performance properties of asphalt mixtures with recycled concrete aggregate from low grade concrete”, Construction and Building Materials, v .126, p 711-719 (2016)
  3. J. Han, K. Wang, X. Wang+, and P. J. Monteiro, “2D Image Analysis for Evaluating Coarse Aggregate Distribution and Concrete Homogeneity”, Construction and Building Materials 127 (2016) 30–42
  4. S. Hua, K. Wang, X. Yao, W. Xu, and Y. He, “Effects of Fibers on Mechanical Properties and Freeze-Thaw Resistance of Phosphogypsum-Slag Based Cementitious Materials”, Construction and Building Materials, v 121, p 290-299, (2016) http://www.sciencedirect.com/science/article/pii/S0950061816309308
  5. S. Choi, K. Wang, J. Chu, “Properties of Biocemented, Fiber Reinforced Sand”, Construction and Building Materials, v 120, p 623-629 (2016) http://www.sciencedirect.com/science/article/pii/S0950061816308601
  6. Q. Hou+, K. Wang, and W. Yodsudjai, “A Simplified Model for Prediction of Shrinkage Behavior of High Performance Concrete Containing Supplementary Cementitious Materials, Journal of Thailand Concrete Association, v. 4, n. 1, p 1-7 (2016) http://www.thaitca.or.th/journal/en/browseissues.html
  7. J. Han and K. Wang, “Influences of bleeding on particle distribution, hydration products, mechanical property, and water absorptivity of the surface layer of Portland cement paste” Construction and Building Materials, v. 115, p 240-246, July 15, 2016;
  8. http://www.sciencedirect.com/science/article/pii/S0950061816305979
  9. S. Hua, K. Wang, X. Yao, “Developing high performance phosphogypsum-based oil-well cementing materials through a step-by-step optimization method”, Cement and Concrete Composite, v. 72, p. 299-308, 2016;
  10. http://www.sciencedirect.com/science/article/pii/S095894651630172X
  11. M. Elkashef+, K. Wang, M.N. Abou-Zeid, “Acid-treated carbon nanotubes and their effects on mortar strength” Frontiers of Structural and Civil Engineering, vol.10, Iss. 2, pp 180–188, 2016
  12. X. Wang+, P. Taylor, K. Wang, and M. Malcolm, “Ultrasonic Wave Propagation Monitoring of Stiffening Process of Self-consolidating Concrete”, Magazine of Concrete Research, v. 68, Is. 3, p.151-162, 2016
  13. J. Han, K. Wang, Y. Wang, and J. Shi, “Influence of Aluminum Sulfate and Anhydrite on Cement Hydration Process”, J. of Materials and Structures, v 49, n 4, p 1105-1114, April 1, 2016; (DOI 10.1617/s11527-015-0561-2) http://link.springer.com/article/10.1617%2Fs11527-015-0561-2
  14. G. Lomboy+ and K. Wang, “Semi-flowable Self-consolidating Concrete and its Applications”, International Journal of Materials and Structural Integrity, Vol. 9, No. 1-3, p. 62-71, 2015; http://www.inderscience.com/offer.php?id=71110
  15. X. Wang+, K. Wang, J. Han, P. Taylor, “Image Analysis Applications on Assessing Static Stability and Flowability of Self-Consolidating Concrete”, Cement and Concrete Composites, vol. 62, p. 156-167, 2015; http://www.sciencedirect.com/science/article/pii/S0958946515000888
  16. J. Han, K. Wang, J. Shi, and Y. Wang, “Influence of Triethanolamine on Hydration and Microstructure of Cement Pastes”, Construction and Building Materials, v. 93, p. 457-462 (2015); http://www.sciencedirect.com/science/article/pii/S0950061815006996
  17. Q. Xu, K. Wang, C. Medina, B. Engquist, “A mathematical model to convert isothermal heat evolution to adiabatic temperatures with validation for cementitious materials”, International Journal of Heat and Mass Transfer, v. 89, Iss: Oct., p. 333–338 (2015)
  18. X. Wang+, K. Wang, J. Tanesi, and A. Ardani, “Effects of Nanomaterials on the Hydration Kinetics and Rheology of Portland Cement Pastes”, Advances in Civil Engineering Materials, Vol. 3, No. 2, pp. 1–18 (2015)
  19. Wang, X+. P. Taylor, K. Wang, G. Morcous, “Using Paste-To-Voids Volume Ratio Evaluating the Performance of Self-Consolidating Concrete Mixtures”, Magazine of Concrete Research, vol. 67, Iss. 14, p. 771-785 (2015), http://dx.doi.org/10.1680/macr.14.00313.
  20. N. Garg+ and K. Wang, “Estimating Efficiency of Fly Ashes: An Alternative Definition of k-Values”, Journal of Sustainable Cement-Based Materials, v. 4, Iss. 1, p. 25-33 (2015) http://www.tandfonline.com/doi/abs/10.1080/21650373.2014.956239#
  21. G. R. Lomboy, X. Wang, and K. Wang. (2014) "Rheological Behavior and Formwork Pressure of SCC, SFSCC, and NC mixtures," Cement and Concrete Composites, Vol. 54, pp. 110-116 (DOI: http://dx.doi.org/10.1016/j.cemconcomp.2014.05.001[2]).
  22. J. Han, K. Wang, J. Shi, and Y. Wang. (2014) "Influence of sodium aluminate on cement hydration and concrete properties," Construction and Building Materials, Vol. 64, pp. 342-349 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2014.04.089[3]).
  23. J. Han, H. Fang, and K. Wang. (2014) "Design and control shrinkage behavior of high strength self-consolidating concrete using shrinkage reducing admixture and super-absorbent polymer," Journal of Sustainable Cement-Based Materials, Vol. 3, Issue 3-4, pp. 182-190 (DOI: http://dx.doi.org/10.1080/21650373.2014.897268[4]).
  24. Z. Ge, K. Wang, R. Sun, D. Huang, and Z. Zhao. (2014) "Properties of self-consolidating concrete containing nano-CaCO3," Journal of Sustainable Cement-based Materials, Issue 3-4, p. 1-10 (DOI: http://dx.doi.org/10.1080/21650373.2014.903213[5]).
  25. J. Hu, Z. Ge, and K. Wang. (2014) "Influence of Cement Fineness and Water-to-Cement Ratio on Mortar Early-Age Heat of Hydration and Set Times," Construction and Building Materials, Vol. 50, pp. 657-663 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2013.10.011[6]).
  26. G. Lomboy and K. Wang. (2013) "Semi-Flowable Self-Consolidating Concrete and its Applications," International Journal of Materials and Structural Integrity (accepted April 2013)
  27. C. Hu, D. Wang, K. Wang, and G. Lu. (2013) "Optimal Design for the Mortar-filled Glass Fiber Reinforced Polymer (GFRP) Tube Dowels," Road Materials and Pavement Design, ISSN: 14680629,   (DOI: http://dx.doi.org/10.1080/14680629.2013.837834[7]).
  28. G. Lomboy, S. Sundararajan, and K. Wang. (2013) "Micro- and Macroscale Coefficients of Friction of Cementitious Materials," Cement and Concrete Research, Vol. 54, pp. 21-28 (DOI: http://dx.doi.org/10.1016/j.cemconres.2013.08.006[8]).
  29. N. Garg, K. Wangand S. Martin. (2013) "A Raman Spectroscopy for Following Evolution of Sulfates and Hydroxides in Cement-Fly Ash Pastes," Cement and Concrete Research, Vol. 53, pp. 91-103 (DOI: http://dx.doi.org/10.1016/j.cemconres.2013.06.009[9]).
  30. P. Hou, S. Kawashima, K. Wang, D. J. Corr, J. Qian and S. P. Shah. (2013) "Effects of Colloidal Nanosilica on Rheological and Mechanical Properties of Fly ash-Cement Mortar," Cement and Concrete Composites, Vol. 35, No. 1, pp. 12-22 (DOI: http://dx.doi.org/10.1016/j.cemconcomp.2012.08.027[10]).
  31. Q. Dong, H. Wu, B. Huang, X. Shu, and K. Wang. (2013) "Investigation into Laboratory Abrasion Test Methods for Pervious Concrete," ASCE Journal of Materials in Civil Engineering, Vol. 25, No. 7, pp. 886-892 (DOI: http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000683).
  32. Y. Chen, K. Wang, X. Wang, and W. Zhou. (2013) "Strength, Fracture, and Fatigue of Pervious Concrete," Building and Concrete Materials, Vol. 42, pp. 97–104 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2013.01.006).
  33. J. Hu, K. Wang, and J. A. Gaunt. (2013) "Behavior and Mix Design Development of Concrete Made with Recycled Aggregate from Deconstructed Lead-Contaminated Masonry Materials," Construction and Building Materials, Vol. 40, pp. 1184–1192. (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2011.07.067[11]).
  34. W. Yodsudjai and K. Wang. (2013) "Chemical Shrinkage Behavior of Pastes Made with Different Types of Cements," Building and Construction Materials, Vol. 40, pp. 854-862 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2012.11.053[12]).
  35. Y. Chen, K. Wang, and D. Liang. (2012) "Mechanical properties of pervious cement concrete," Journal of Central South University, Vol. 19, Issue 11, pp. 3329-3334 (DOI: http://dx.doi.org/10.1007/s11771-012-1411-9[13]).
  36. J. Hu, K. Wang and Z. Ge. (2012) "Study of concrete thermal properties for sustainable pavement design," Journal of Sustainable Cement-Based Materials, Vol. 1, No. 3, pp. 126-137 (DOI: http://dx.doi.org/10.1080/21650373.2012.745923[14]).
  37. N. Garg and K. Wang. (2012) "Comparing the performance of different commercial clays in fly ash modified mortars," Journal of Sustainable Cement-based Materials, Vol. 1, No. 3, pp. 111-125 (DOI: http://dx.doi.org/10.1080/21650373.2012.745217[15]).
  38. X. Wang, K. Wang, F. Bektas, P. Taylor. (2012) "Drying shrinkage of ternary blend concrete in Transportation Structures," Journal of Sustainable Cement-based Materials, Vol. 1, No. 1-2, pp. 56-66 (DOI: http://dx.doi.org/10.1080/21650373.2012.728566[16]).
  39. P. Hou, K. Wang, J. Qian, S. Kawashima, D. Kong, S. P. Shah. (2012) "Effects of Colloidal NanoSiO2 on Fly Ash Hydration," Cement and Concrete Composite, Vol. 34, No. 10, pp. 1095-1210 (DOI: http://dx.doi.org/10.1016/j.cemconcomp.2012.06.013[17]).
  40. X. Wang, F. Bektas, P. Taylor, K. Wang, and P. J. Tikalsky. (2012) "Drying shrinkage behavior of mortars made with ternary blends," J. of Transportation Research Record (TRB), Construction, No. 2290, pp. 52–59 (DOI: http://dx.doi.org/10.3141/2290-07[18]).
  41. G. Lomboy, K. Wang, and Z. Quanji. (2012) "Properties of Cementitious Materials in their Dry State and their Influences on Viscosity of the Cementitious Pastes," Powder Technology, Vol. 229C, pp. 104-111 (DOI: http://dx.doi.org/10.1016/j.powtec.2012.06.015[19]).
  42. Z. Ge, K. Wang, and S. P. Shah. (2012) "Hydration and Strength Development in a Cement Kiln Dust-Fly Ash System," Journal of the Chinese Ceramic Society, Vol. 40, No. 1, pp. 12-19.
  43. G. Lu, X. Li, K. Wang. (2012) "A Numerical Study on the Damage of Projectile Impact on Concrete Targets," Journal of Computers and Concrete, Vol. 9, No. 1, pp. 21-33 (DOI: http://dx.doi.org/10.12989/cac.2012.9.1.021[20]).
  44. F. Bektas, K. Wang. (2012) "Performance of Ground Clay Brick in ASR-Affected Concrete: Effects on Expansion, Mechanical Properties and ASR Gel Chemistry," Cement and Concrete Composites, Vol. 34,  pp. 273–278 (DOI: http://dx.doi.org/10.1016/j.cemconcomp.2011.09.012[21]).
  45. G. Lomboy, K. Wang, and C. Ouyang. (2011) "Shrinkage and Fracture Properties of Semi-flowable Self Consolidating Concrete," special issue on "Energy Efficient and Environmentally Friendly Paving Materials," ASCE Journal of Materials in Civil Engineering, Vol. 23, No. 11, pp. 1514-1524.
  46. C. V. Hazaree, K. Wang, H. Ceylan, and K. Gopalakrishnan. (2011) "Capillary Transport in RCC: water/cement-strength-F-T resistance," ASCE's Journal of Materials in Civil Engineering, Vol. 23, No. 8, August 2011, pp. 1181-1191.
  47. G. Lomboy, K. Wang, P. Taylor, and S. P. Shah. (2011) "Guidelines for Design, Testing, Production and Construction of Semi-Flowable Self-Consolidating Concrete for Slip-Form Paving," International Journal of Pavement Engineering, Taylor & Francis, September 2011, pp. 1-10.
  48. G. Lomboy, S. Sundararajan, K. Wang, and S. Subramaniam. (2011) "A Test Method for Determining Adhesion Forces and Hamaker Constants of Cementitious Materials Using Atomic Force Microscopy," Cement and Concrete Research, Vol. 41, No. 11, pp. 1157-1166 (DOI: http://dx.doi.org/10.1016/j.cemconres.2011.07.004[22]).
  49. Z. Ge, K. Wang, and Z. Gao. (2012) "Prediction of Pavement Concrete Strength Development, Joint Sawing and Opening Time Using FEMLAB," ASCE Journal of Performance of Constructed Facilities, Vol. 26, No. 2, pp. 162-169 (DOI: http://dx.doi.org/10.1061/(ASCE)CF.1943-5509.0000246). (Also published on (2011) Emerging Technologies for Material, Design, Rehabilitation, and Inspection of Roadway Pavements, No. 218 GSP, pp. 200-207 (DOI: http://dx.doi.org/10.1061/47629(408)25).)
  50. G. Lu and K. Wang. (2011) "Theoretical and Experimental Study on Shear Behavior of Fresh Mortar," Cement and Concrete Composites, Vol. 33, Issue 2, pp. 319-327 (DOI: http://dx.doi.org/10.1016/j.cemconcomp.2010.09.002[23]).
  51. J. Hu and K. Wang. (2011) "Effect of Coarse Aggregate Characteristics on Concrete Rheology," Construction and Building Materials, Vol. 25, Issue 3. pp. 1196-1204 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2010.09.035[24]).
  52. Q. Xu, M. Ruiz, J. Hu, K. Wang, and R. Rasmussen. "Modeling Hydration Properties and Temperature Developments of Early-Age Concrete Pavement Using Calorimetry Tests," Thermochimica Acta, Vol. 512, Issues 1-2, pp. 76-85 (January 10, 2011) (DOI: http://dx.doi.org/10.1016/j.tca.2010.09.003[25]).
  53. J. T. Kevern, V. R. Schaefer, and K. Wang. (2011) "Mixture Proportion Development and Performance Evaluation of Pervious Concrete for Overlay Applications," ACI Materials Journal, Vol. 108, Issue 4, pp. 439-448 (DOI: http://dx.doi.org/10.14359/51683117[26]).
  54. T. D. Rupnow, K. Wang, V. R. Schaefer, and P. Tikalsky. (2011) "A Simple Method for Characterizing and Predicting Temperature Behavior of Ternary Cementitious Systems," Construction and Building Materials, Vol. 25, No. 5,  pp. 2290–2297 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2010.11.022[27]).
  55. C. V. Hazaree, H. Ceylan, and K. Wang. (2011) "Influences of mixture composition on properties and freeze-thaw resistance of RCC," Construction and Building Materials, Vol. 25, Issue 1, January 2011, pp. 313-319 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2010.06.023[28]).
  56. J. Hu, K. Wang, and J. A. Gaunt. ("Sequestering Lead by Utilizing Lead-Based Paint (LBP) - Contaminated Masonry Materials as Recycled Aggregate in Portland Cement Concrete," Journal of Solid Waste Technology and Management, Vol. 54, No. 12, pp. 1453-1460 (Link to article summary[29]).
  57. J. Hu, K. Wang, and J. A. Gaunt. (2010) "Recycling Lead-Based Paint Contaminated Deconstructed Masonry Materials as Aggregate for Portland Cement Concrete – A Cost Effective and Environmental Friendly Approach," Resources, Conservation and Recycling, Vol. 54, Issue 12, October 2010, pp. 1453-1460 (DOI: http://dx.doi.org/10.1016/j.resconrec.2010.07.002[30]).
  58. H. E. Cutler, K. Wang, V. R. Schaefer, and J. T. Kevern. (2010) "Resistance of Portland Cement Pervious Concrete to Deicing Chemicals," J. of Transportation Research Record (TRB), Construction, no. 2164, p. 98-104 (DOI: http://dx.doi.org/10.3141/2164-13[31]).
  59. V. R.  Schaefer, J. T. Kevern, B. Izevbekhai, K. Wang, H. Curler, and P. Wiegand. (2010) "Construction and Performance of the Pervious Concrete Overlay at Minnesota Road Research Project," J. of Transportation Research Record (TRB), Vol. 2164, pp. 82-88 (DOI: http://dx.doi.org/10.3141/2164-11[32]).
  60. S. Kim, K. Gopalakrishnan, H. Ceylan, and K. Wang. (2010) "Early-age Response of Concrete Pavements to Temperature and Moisture Variations," The Baltic Journal of Road and Bridge Engineering, Vol. 5, No. 3, pp. 132-138 (DOI: http://dx.doi.org/10.3846/bjrbe.2010.19[33]).
  61. Q. Xu, J. Hu, J. M. Ruiz, K. Wang, and Z. Ge. (2010) "Isothermal Calorimetry Tests and Modeling of Cement Hydration Parameters," Thermochimica Acta, Vol. 499, Issues 1-2, pp. 91-99 (DOI: http://dx.doi.org/10.1016/j.tca.2009.11.007[34]).
  62. J. T. Kevern, K. Wang, and V. R. Schaefer. (2010) "The Effect of Coarse Aggregate on the Freeze-Thaw Durability of Pervious Concrete," ASCE Journal of Materials in Civil Engineering, Vol. 22, No. 5, pp. 469-475. (DOI: http://dx.doi.org/10.1061/(ASCE)MT.1943-5533.0000049).
  63. T. Voigt, J. Mbele, K. Wang, and S. P. Shah. (2010) "Using Fly Ash, Clay and Fibers for Simultaneous Improvement of Concrete Green Strength and Consolidatability for Slip-form Pavement," ASCE Journal of Materials in Civil Engineering, Vol. 22, No. 2, pp. 196-206 (DOI: http://dx.doi.org/10.1061/(ASCE)0899-1561(2010)22:2(196)).
  64. G. Lu and K. Wang. (2010) "Investigation into Yield Behavior of Fresh Cement Paste: model and experiment," ACI Materials Journal, Vol. 107, No. 1, pp. 1-8 (DOI: http://dx.doi.org/10.14359/51663459[35]).
  65. J. T. Kevern, V. R. Schaefer, and K. Wang. (2009) "Evaluations of Pervious Concrete Workability Using Gyratory Compaction," ASCE Journal of Materials in Civil Engineering, Vol. 21, No. 12, pp. 764-770 (DOI: http://dx.doi.org/10.1061/ASCE0899-1561200921:12764[36]).
  66. G. Lomboy and K. Wang. (2009) "Effects of Strength, Permeability, and Air Void Parameters on Freezing-Thawing Resistance of Concrete with and without Air Entrainment," Journal of ASTM International, Vol. 6, Issue 10 (DOI: http://dx.doi.org/10.1520/JAI102454[37]).
  67. J. T. Kevern, V. R. Schaefer, and K. Wang. (2009) "Temperature Behavior of a Pervious Concrete System," Transportation Research Record: Journal of the Transportation Research Board, No. 2098, pp. 94-104 (DOI: http://dx.doi.org/10.3141/2098-10[38]).
  68. J. T. Kevern, K. Wang, and V. R. Schaefer. (2009) "Test Methods for Characterizing Air Void Systems in Portland Cement Pervious Concrete," Journal of ASTM International, Vol. 6, Issue 9, (DOI: http://dx.doi.org/10.1520/JAI102451[39]).
  69. Z. Ge, K. Wang, P. J. Sandberg, and J. M. Ruiz. (2009) "Characterization and Performance Prediction of Cement-based Materials Using a Simple Isothermal Calorimeter," Journal of Advanced Concrete Technology, Vol. 7, No. 3, pp. 355-366 (DOI: http://dx.doi.org10.3151/jact.7.355[40]).
  70. J. T. Kevern, V. R.  Schaefer, and K. Wang. (2009) "The Effect of Curing Regime on Pervious Concrete Abrasion Resistance," Journal of Testing and Evaluation, Vol. 37, No. 4, pp. 337-342 (DOI: http://dx.doi.org/10.1520/JTE101761[41]).
  71. F. Bektas, K. Wang, and H. Ceylan. (2009) "Effects of Crushed Clay Brick Aggregate on Mortar Durability," Construction and Building Materials, Vol. 23, No. 5, pp. 1909-1914 (DOI: http://dx.doi.org/10.1016/j.conbuildmat.2008.09.006[42]) .
  72. Z. Ge and K. Wang. (2009) "Modified Heat of Hydration and Strength Models for Concrete Containing Fly Ash and Slag," International Journal of Computers and Concrete, Vol. 6, No. 1, pp. 19-40 (DOI: http://dx.doi.org/10.12989/cac.2009.6.1.019[43]).
  73. F. Bektas, K. Wang, and H. Ceylan. (2008) "Use of Ground Clay Brick as a Pozzolanic Material in Concrete," Journal of ASTM International, Vol. 5, Issue 10 (DOI: http://dx.doi.org/10.1520/JAI101681[44]).
  74. F. Bektas, K. Wang, and H. Ceylan. "Effect of Portland Cement Fineness on ASTM C1260 Expansion," Journal of Testing and Evaluation, Vol. 36, No. 5, pp. 436-442 (DOI: http://dx.doi.org/10.1520/JTE101440[45]).
  75. J. T. Kevern, V. R. Schaefer, and K. Wang. (2008) "Portland Cement Pervious Concrete: A Field Experience from Sioux City," Open Construction and Building Technology Journal, Vol. 2, pp. 82-88 (DOI: http://dx.doi.org/10.2174/1874836800802010082[46]).
  76. T. D. Rupnow, K. Wang, and V. R. Schaefer. (2008) "Effect of Sampling Location on the Air Void Analyzer Test Results on Concrete Pavements: Evaluation of Data from a Sixteen State Pooled Fund Project," Journal of Testing and Evaluation, Vol. 36, No. 4, pp. 307-319.
  77. J. T. Kevern, K. Wang, and V. R. Schaefer. "A Novel Approach to Characterize Entrained Air Content in Pervious Concrete," Journal of ASTM International, Vol. 5, No. 2, ID: JAI101434.
  78. J. T. Kevern, V. R. Schaefer, K. Wang, and M. T. Suleiman. (2008) "Mixture Development to Improve Pervious Concrete Freeze Thaw Durability," Journal of ASTM International, Vol. 5, No. 2, ID: JAI101320.
  79. G. Lu, K. Wang, and T. J Rudolphi. (2008) "Modeling Rheological Behavior of Highly Flowable Mortar Using Concepts of Particle and Fluid Mechanics," Cement and Concrete Composites, Vol. 30, Issue 1, pp. 1-12.
  80. H. Ceylan, S. Kim, K. Gopalakrishnan, and K. Wang. (2007) "Environmental Effects on Deformation and Smoothness Behavior of Early Age Jointed Plain Concrete Pavements," Transportation Research Record, No. 2037, Rigid and Flexible Pavement Design, pp 30-39 (DOI: http://dx.doi.org/10.3141/2037-03[47]).
  81. F. Bektas, L. Turanli, K. Wang, and H. Ceylan. (2007) "Comparative Performance of Ground Clay Brick in Mitigation of the Alkali-silica Reaction," ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 12, pp.1070-1078 (DOI: http://dx.doi.org/10.1061/(ASCE)0899-1561(2007)19:12(1070)).
  82. B. Y. Pekmezci, T. Voigt, K. Wang, S. P. Shah. (2007) "Low Compaction Energy Concrete for Improved Slip Form Casting of Concrete Pavements," ACI Materials Journal, Vol. 104, No. 3, pp. 251-258.
  83. J. Hu and K. Wang. (2007) "Effects of Size and Uncompacted Voids of Aggregate on Mortar Flow Ability," Journal of Advanced Concrete Technology, Vol. 5, No. 1, pp. 1-11.
  84. K. Wang, A. Mishulovich, and S. P. Shah. (2007) "Activations and Properties of Cementitious Materials Made with Cement-Kiln Dust and Class F Fly Ash," ASCE Journal of Materials in Civil Engineering, Vol. 19, No. 1, pp. 112-119.
  85. T. D. Rupnow, V. R. Schaefer, K. Wang, and B. L. Hermanson. (2006) "Investigation of Portland Cement Concrete Mix Consistency and Concrete Performance using a Two-Stage Mixing Process," Transportation Research Record, Journal of the Transportation Research Board, No. 1979, Concrete Materials, pp. 12-20.
  86. S. Zhang and K. Wang. (2006) "Investigation into the Effects of Materials and Mixing Procedures on Air Void Characteristics of Fresh Concrete Using Air Void Analyzer (AVA)," Journal of ASTM International, Vol. 3, No. 10, ID: JAI100435.
  87. K. Wang, P. R. L. Helene, and P. J. M. Monteiro. (2006) "Potential Use of Zinc in the Corrosion Repair," Cement and Concrete Composites, Special Issue on Patch and Structural Repair, Vol. 28, No. 8, pp. 707–715.
  88. K. Wang, J. Cable, and Z. Ge. (2006) "Evaluation of Pavement Curing Effectiveness and Its Effects on Concrete Properties,” ASCE Journal of Materials in Civil Engineering, Vol. 18, No. 3, p. 377-389.
  89. K. Wang, D. Nelsen, and W. Nixon. (2006) "Effects of Deicing Chemicals on Damage of Concrete Materials," Cement and Concrete Composites, Vol. 28, No. 2, pp. 173-188.
  90. K. Wang and J. Hu. (2005) "Use of a Moisture Sensor for Monitoring Concrete Mixture Uniformity," Journal of Advanced Concrete Technology, Vol. 3, No. 3, pp. 1-14.
  91. K. Wang, S. M. Schlorholtz, J. Hu, and S. Zhang. (2005) "Investigation into Flow Property Measurements of Low-Slump Concrete Using Vibrating Slope Apparatus," Journal of ASTM International, Vol. 2, No. 5, JAI ID13054.
  92. K. Wang, S. P. Shah, and A. Mishulovich. (2004) "Effects of Curing Temperature and NaOH Addition on Hydration and Strength Development of Clinker Free CKD-Fly Ash Binders," Cement and Concrete Research, Vol. 34, No. 2, pp. 299-309.
  93. P. M. Babaian, K. Wang, A. Mishulovich, S. Bhattacharja, and S. P. Shah. (2003) "Effect of Mechano-Chemical Activation on Reactivity of Cement Kiln Dust-Fly Ash Systems," ACI Material Journal, Vol .100, No. 1, pp. 55–62.
  94. K. Wang, M. S. Konsta-Gdoutos, and S. P. Shah. (2002) "Hydration, Rheology, and Strength of CKD-Slag-OPC Binders," ACI Material Journal, Vol. 99, No. 2, pp. 173-179.
  95. K. Wang, S. P. Shah and P. Phuaksuk. (2001) "Plastic Shrinkage Cracking in Concrete Materials– Influence of Fly Ash and Fibers," ACI Material Journal, Vol. 98, No. 6, pp. 1–7.
  96. S. Yoon, K. Wang, W. J. Weiss, and S. P. Shah. (2000) "Interaction between Loading, Corrosion, and Serviceability of Reinforced Concrete," ACI Material Journal, Vol. 97, No. 6, pp. 637–644.
  97. C. Aldea, F. J. Young, K. Wang, and S. P. Shah. (2000) "Effects of Curing Conditions on Properties of Concrete Using Slag Replacement," Cement and Concrete Research, Vol. 30, No. 3, pp. 465–472.
  98. K. Wang and P. J. M. Monteiro. (1999) "Optical Microscopy Analysis of Ice Formation and Propagation in Concrete," L'Industria Italiana del Cement, No. 739, p. 64-81.
  99. P. J. M. Monteiro, K. Wang, G. Sposito, M. C. dos Santos and W. Pacelli de Andrade. (1999) "A Reply to Discussion of the Paper 'Influence of Mineral Admixtures on the Alkali-Aggregate Reaction,'" Cement and Concrete Research, Vol. 28, No. 8, p. 1195.
  100. P. J. Monteiro, K. Wang, G. Sposito, M. C. dos Santos, and W. P. de Andrade. (1997) "Influence of Mineral Admixtures on The Alkali-Aggregate Reaction," Cement and Concrete Research, Vol. 27, No. 12, p. 1899-1909 (DOI: http://dx.doi.org/10.1016/S0008-8846(97)00206-8[48]).
  101. K. Wang, D. Jansen, S.P. Shah, and A. Karr. (1997) "Permeability Study of Cracked Concrete," Cement and Concrete Research, Vol. 27, No. 3, pp. 381-393 (DOI: http://dx.doi.org/10.1016/S0008-8846(97)00031-8[49]).
  102. K. Wang, P. J. Monteiro, B. Rubinsky, and A. Arav. (1996) "Microscopic Study of Ice Propagation in Concrete," ACI Materials Journal, Vol. 93, No. 4, pp. 370-377 (DOI: http://dx.doi.org/10.14359/9824[50]).

  1. kejinw@iastate.edu: mailto:kejinw@iastate.edu
  2. http://dx.doi.org/10.1016/j.cemconcomp.2014.05.001: http://dx.doi.org/10.1016/j.cemconcomp.2014.05.001
  3. http://dx.doi.org/10.1016/j.conbuildmat.2014.04.089: http://dx.doi.org/10.1016/j.conbuildmat.2014.04.089
  4. http://dx.doi.org/10.1080/21650373.2014.897268: http://dx.doi.org/10.1080/21650373.2014.897268
  5. http://dx.doi.org/10.1080/21650373.2014.903213: http://dx.doi.org/10.1080/21650373.2014.903213
  6. http://dx.doi.org/10.1016/j.conbuildmat.2013.10.011: http://dx.doi.org/10.1016/j.conbuildmat.2013.10.011
  7. http://dx.doi.org/10.1080/14680629.2013.837834: http://dx.doi.org/10.1080/14680629.2013.837834
  8. http://dx.doi.org/10.1016/j.cemconres.2013.08.006: http://dx.doi.org/10.1016/j.cemconres.2013.08.006
  9. http://dx.doi.org/10.1016/j.cemconres.2013.06.009: http://dx.doi.org/10.1016/j.cemconres.2013.06.009
  10. DOI: http://dx.doi.org/10.1016/j.cemconcomp.2012.08.027:
  11. http://dx.doi.org/10.1016/j.conbuildmat.2011.07.067: http://dx.doi.org/10.1016/j.conbuildmat.2011.07.067
  12. http://dx.doi.org/10.1016/j.conbuildmat.2012.11.053: http://dx.doi.org/10.1016/j.conbuildmat.2012.11.053
  13. http://dx.doi.org/10.1007/s11771-012-1411-9: http://dx.doi.org/10.1007/s11771-012-1411-9
  14. http://dx.doi.org/10.1080/21650373.2012.745923: http://dx.doi.org/10.1080/21650373.2012.745923
  15. http://dx.doi.org/10.1080/21650373.2012.745217: http://dx.doi.org/10.1080/21650373.2012.745217
  16. http://dx.doi.org/10.1080/21650373.2012.728566: http://dx.doi.org/10.1080/21650373.2012.728566
  17. http://dx.doi.org/10.1016/j.cemconcomp.2012.06.013: http://dx.doi.org/10.1016/j.cemconcomp.2012.06.013
  18. http://dx.doi.org/10.3141/2290-07: http://dx.doi.org/10.3141/2290-07
  19. http://dx.doi.org/10.1016/j.powtec.2012.06.015: http://dx.doi.org/10.1016/j.powtec.2012.06.015
  20. http://dx.doi.org/10.12989/cac.2012.9.1.021: http://dx.doi.org/10.12989/cac.2012.9.1.021
  21. http://dx.doi.org/10.1016/j.cemconcomp.2011.09.012: http://dx.doi.org/10.1016/j.cemconcomp.2011.09.012
  22. http://dx.doi.org/10.1016/j.cemconres.2011.07.004: http://http://dx.doi.org/10.1016/j.cemconres.2011.07.004
  23. http://dx.doi.org/10.1016/j.cemconcomp.2010.09.002: http://dx.doi.org/10.1016/j.cemconcomp.2010.09.002
  24. http://dx.doi.org/10.1016/j.conbuildmat.2010.09.035: http://dx.doi.org/10.1016/j.conbuildmat.2010.09.035
  25. http://dx.doi.org/10.1016/j.tca.2010.09.003: http://dx.doi.org/10.1016/j.tca.2010.09.003
  26. http://dx.doi.org/10.14359/51683117: http://dx.doi.org/10.14359/51683117
  27. http://dx.doi.org/10.1016/j.conbuildmat.2010.11.022: http://dx.doi.org/10.1016/j.conbuildmat.2010.11.022
  28. http://dx.doi.org/10.1016/j.conbuildmat.2010.06.023: http://dx.doi.org/10.1016/j.conbuildmat.2010.06.023
  29. Link to article summary: https://www.serdp-estcp.org/Program-Areas/Resource-Conservation-and-Climate-Change/RC-1548
  30. http://dx.doi.org/10.1016/j.resconrec.2010.07.002: http://dx.doi.org/10.1016/j.resconrec.2010.07.002
  31. http://dx.doi.org/10.3141/2164-13: http://dx.doi.org/10.3141/2164-13
  32. http://dx.doi.org/10.3141/2164-11: http://dx.doi.org/10.3141/2164-11
  33. http://dx.doi.org/10.3846/bjrbe.2010.19: http://dx.doi.org/10.3846/bjrbe.2010.19
  34. http://dx.doi.org/10.1016/j.tca.2009.11.007: http://dx.doi.org/10.1016/j.tca.2009.11.007
  35. http://dx.doi.org/10.14359/51663459: http://dx.doi.org/10.14359/51663459
  36. http://dx.doi.org/10.1061/ASCE0899-1561200921:12764: http://dx.doi.org/10.1061/ASCE0899-1561200921:12764
  37. http://dx.doi.org/10.1520/JAI102454: http://dx.doi.org/10.1520/JAI102454
  38. http://dx.doi.org/10.3141/2098-10: http://dx.doi.org/10.3141/2098-10
  39. http://dx.doi.org/10.1520/JAI102451: http://dx.doi.org/10.1520/JAI102451
  40. http://dx.doi.org10.3151/jact.7.355: http://dx.doi.org10.3151/jact.7.355
  41. http://dx.doi.org/10.1520/JTE101761: http://dx.doi.org/10.1520/JTE101761
  42. http://dx.doi.org/10.1016/j.conbuildmat.2008.09.006: http://dx.doi.org/10.1016/j.conbuildmat.2008.09.006
  43. http://dx.doi.org/10.12989/cac.2009.6.1.019: http://dx.doi.org/10.12989/cac.2009.6.1.019
  44. http://dx.doi.org/10.1520/JAI101681: http://dx.doi.org/10.1520/JAI101681
  45. http://dx.doi.org/10.1520/JTE101440: http://dx.doi.org/10.1520/JTE101440
  46. http://dx.doi.org/10.2174/1874836800802010082: http://dx.doi.org/10.2174/1874836800802010082
  47. http://dx.doi.org/10.3141/2037-03: http://dx.doi.org/10.3141/2037-03
  48. http://dx.doi.org/10.1016/S0008-8846(97)00206-8: http://dx.doi.org/10.1016/S0008-8846(97)00206-8
  49. http://dx.doi.org/10.1016/S0008-8846(97)00031-8: http://dx.doi.org/10.1016/S0008-8846(97)00031-8
  50. http://dx.doi.org/10.14359/9824: http://dx.doi.org/10.14359/9824

Source URL: https://www.ccee.iastate.edu/facultystaff/